Artificial Grass

How To Install Artificial Grass On Concrete?

Share this article

The use of artificial grass for both indoor and outdoor areas such as landscaping, lawns, gardens, and, playgrounds has been increasing day by day due to its potential benefits. However, the installation of this durable green turf requires basic knowledge about its composition, precise handling, and use of required materials. In this article, Grass Carpet has exhibited the complete procedure of artificial grass installation on concrete in a step-by-step guide. Furthermore, we have also assembled a list of necessary tools for the installer’s convenience and flawless installation. By following these practical steps, you can accomplish your DIY project in a smoother and better way.

Installation Of Artificial Grass On Concrete

Artificial Grass Installation On Concrete | An Exclusive Method

Covering lawns with artificial grass not only provides a lush green ambiance but also ensures maximum functionalities such as weather resistance, easy maintenance, and zero water, and electricity requirements. Unlike natural grass, there is no risk of weeds and other microbial agents due to its unique composition with polyurethane, polyethylene, nylon, and polypropylene.

Read Also: Clean And Maintain Artificial Grass

Required Stuff For Grass Installation

  • Measuring Tape
  • Level
  • Hammer
  • Carpet Cutter
  • Putty Knife
  • Landscaping Rake
  • Carpet Stretcher
  • Power Broom
  • Rototiller
  • Plastic Bender Board
  • Trowel

Step 1: Surface Area Preparation

First, prepare your floor surface by removing debris, stains, or grease and washing. To remove dirt and dust particles, use a heavy-duty broom. After removing the dust particles, wash the concrete surface with hot water to eliminate the grease or stains. For sticky grease and staining, a wide range of effective cleaning solutions are available, you can mix them in hot water for appropriate results.

Surface Area Preparation

Step 2: Leveling Of Ground Surface

If you explore any dents or dips on the concrete surface, you should fill them before laying the grass carpet to level the surface. To fill these holes, you can use heavy-duty fillers or compounds, mortars, and cement-based materials. After filling the materials, you should check the smoothness of the complete surface area with the aid of level. It must be ensured that there will be no minor difference in the height of the concrete floor surface.

Step 3: Crafting A Drain Hole

Building a drain hole on any side of the surface area is another critical step in this DIY method. Artificial turf grass is impermeable to water and other liquid materials flow thus it requires a proper draining system in case of showering or rainfall. If you forget to craft a drain hole on the surface area, the water will accumulate on grass turfs which takes time to evaporate. Therefore, always keep a small drain hole at any suitable position for proper draining.

Crafting A Drain Hole

Read Also: Pros and Cons of Artificial Grass

Step 4: Border Installation Around The Grass

Besides drainage, you should also install a border around the grass turf periphery on a floor surface. This will not only enhance the floor’s elegance but also prevent the carpet from slumping. For crafting the border, you should use the concrete curbs. However, you can also place the waterproof plastic bender board at the level of grass to avoid the blocking of water drainage.

Border Installation Around The Grass

Step 5: Laying Of Adhesive Materials

This step is the main difference between the artificial grass installation on concrete. In the case of soil, we need to add base materials on the surface for installing it. However, if you’re going to install artificial green turf on the concrete floor, you will apply strong adhesive material for durable fixing. For smooth and even spreading of adhesive material on the floor surface, you should use a trowel. It must be ensured that you have covered the entire floor surface with material otherwise it will affect the bonding of concrete with carpet.

Laying Of Adhesive Materials

Step 6: Rolling Out Artificial Turf On Side

Before final placement, you should unroll the grass carpet anywhere on the floor side to make it straight and flexible. During transportation, keeping the carpet in rolled form makes it circular or uneven. Therefore, It takes time to restore its smoothness and normal shape. In addition, laying the flat carpet also leads to the formation of robust joints between the surrounding surfaces and the carpet.

Rolling Out Artificial Turf On Side

Step 7: Cutting Of Excessive Grass Blades

In this step, finalize the dimensions of the complete floor area using a measuring tape. Cut the unrolled turf strips with a sharp carpet cutter or putty knife as per the required length and width. Start placing the strips of artificial turf carpet from any one side. After fixing all the carpet strips on the concrete flooring, you should also remove the excessive portion from all sides per the floor layout or shape.

Cutting Of Excessive Grass Blades

Read Also: Common Artificial Grass Installation Mistakes

Step 8: Seam Artificial Turfs If Required

To seam the artificial turf, you should apply the carpet stretcher to the grass turf to remove all the gaps and flexibilities across the surface area. After stretching the entire grass surface, you need to seam the connecting ends of the carpet by fixing the nails. Moreover, you should also install nails or landscaping anchor pins on all the sides of artificial grass strips with a hammer to make them fasten to the surface.

Step 9: Addition Of Infill Material

Another important step in this DIY installation journey is to add infill material across this synthetic grass. To keep the grass fibers or bristles standing, this addition is necessary. For infill materials, you can use black crumbs, washed silica, copper slag, and some other materials. Placement of infill materials not only keeps the turf in a standing position but also provides unique strength to the carpet layer. Place the material on the entire surface area evenly to avoid any bumps or seams on the carpet.

Addition Of Infill Material

Step 10: Brushing after artificial grass installation on concrete

After completing the installation of fake grass, you should also brush off the grass turfs to improve its shine and texture. You can use a power or nylon broom to remove extra material or dust particles from the grass surface. In the end, you should spray the water on the turfs with a garden hose to wash the turf and spread the base material evenly.

Read Also: Artificial Grass Vs Natural Grass 

Brushing Of Grass After Installation

Wrapping Up!

The installation of artificial grass is not an easy DIY project it requires a professional approach. Each step of its installation process demands technical knowledge about the required tools and materials. For DIY enthusiasts, Grass Carpet has mentioned the complete procedure into multiple effective yet easy steps. From choosing the perfect material to applying the best technique, we have made it easy for you to take initiative in your DIY journey.

Tags: Artificial Grass
Installing Artificial Grass On Decking | All You Need To Know
Artificial Grass Vs Natural Grass | Spot The Differences